A loveszellato.hu a működése során sütiket használ. Az oldal böngészésével hozzájárulsz a sütik használatához.

 

 

Termékek Menü

Hiperfire AR-15/10 EDT® Designated Marksman elsütőszerkezet

Ár:
53.650 Ft
Cikkszám: HIP-EDTDMR-AR15
Elérhetőség: Ajánlatkérés
Gyártó: Hiperfire

Leírás és Paraméterek

CSAK SZEMÉLYES VÁSÁRLÁS! JELEN FELÜLET CSAK A RENDELÉS SZÁNDÉKÁNAK JELZÉSÉRE SZOLGÁL!

Az árak tájékoztató jellegűek, nem minősülnek hivatalos ajánlattételnek és az árváltozás jogát fenntartjuk!

Hiperfire AR-15/10 EDT® Designated Marksman Trigger

Smooth, Consistent, Medium-Weight Pull - BIG Improvement Over G.I. Trigger
Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.  

Vélemények

Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!